Asterisk/Dahdi/Libpri/Centos

第1章：安装前准备

文档编写以及环境配置说明

1）本文档是Sangoma A1XX  PCI/PCI-E 系列中继数字语音板卡产品技术wiki，同样可以适用于1E1，2E1，4E1，8E1，16E1 等其他端口的数字语音板卡。
   不同之处在于端口的数量不同，配置文件的端口参数不同。请客户留意！！！
2）测试的软件版本根据时间的不同可能有所变化，请客户下载稳定的软件版本。
3) 此文档安装环境支持asterisk/dahdi/pri/centos 安装，不完全适用于Elastix/Freeswitch或者SS7
4）为了高效专业地解决客户语音板卡问题，如果有疑问，请发邮件到Sangoma 中国总代理（james.zhu@hiastar.com）
5) Sangoma产品中文最新的信息，请访问：http://www.hiastar.com

检查主板PCI槽

安装板卡之前，请检查主板的PCI 槽是否可以支持Sangoma 语音板卡，Sangoma A101D代表1口PCI带回声模块板卡，A101DE 代表PCI-E 带回声抑制模块板卡。点击查看贵公司购买的主板是否支持标准的PCI插槽：主板PCI/PCI-E 介绍
为了快速高效解决现场技术问题，强烈建议实施人员细心阅读以下建议：

E1线端口

标准的2M E1线路支持两种形式的接入方式：75欧姆（BNC）/120欧姆（RJ45）。几个端口的匹配请客户留意：
1）Sangoma 厂家配置RJ45 的直通线。通常运营商端口你是BNC头或者RJ45. 请用户提前了解现场情况。
2）可利用75/120欧姆转接盒实现接入方式的转换。
3）如何做直通线，交叉线，回换测试线，请访问：E1 RJ45 线序。

E1线路支持的服务

企业通信接入的E1线路服务是接入配置的重要内容，客户需要提前了解服务的影响必要配置：

1）线路是否支持CRC4校验。
2）运营商要求的pri 拨号规则，通常包括：本地用户（local），国家（national），未知（unknown），国际（international） 4种格式。
3）出局是否带需要携带CID。

以上参数如果配置不正确，影响正常呼叫通话。另外，如果需要购买E1 数字线路，请咨询VOIP88业务人员。

第2章：下载 Asterisk/Dahdi/Libpri

执行命令 cd /usr/src，转到src 目录

wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz 
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz 
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-1.6.2-current.tar.gz

注意，以上版本只是安装板卡的例子，版本可能随时更新，请用户留意。

第3章：安装 Asterisk/Dahdi/Libpri

1）检查系统是否检测到sangoma 语音板卡：执行命令 lspci -vvv，如果检测到板卡信息（会显示sangoma厂商信息），执行下一步；如果没有，重新拔出板卡，然后重新插入板卡。
2）检查安装必要的软件支持包-Centos 环境下，用户必须确认以下安装包成功安装！
访问链接了解安装包支持环境:
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Packages
http://www.voip-info.org/wiki/view/Asterisk+11+Installation+on+CentOS+6
http://wiki.sangoma.com/wanpipe-linux-asterisk-dahdi
Centos 环境下，安装支持包，和内核开发包：

 
yum -y install kernel-devel-$(uname -r) libtool* make gcc patch perl bison gcc-c++ ncurses-devel flex 
libtermcap-devel autoconf* automake* autoconf

Ubutun/Debian 环境下：

apt-get -y install gcc g++ automake autoconf libtool make libncurses5-dev flex bison patch libtool autoconf linux-headers-$(uname -r) sqlite3 libsqlite3-dev

以上支持包必须确认完全正确安装，如果出现错误，请重新安装，确保所有支持包完整安装。特别留意内核开发包的安装！
3）为了安装方便，强烈建议减压下载源代码asterisk，dahdi，libpri到 /usr/src目录下
安装dahdi 硬件接口模块

tar xvzf dahdi-linux-complete<version>
cd dahdi-linux-complete <version> 
make 
make install

安装libpri 协议支持包

tar xvfz libpri-<version>
cd libpri-<version>
make 
make install

安装asterisk

tar xvfz asterisk-<version>.tgz
cd asterisk-<version>
./configure
make
make install
make samples // 如果第一次安装，请执行这个命令；如果是更新系统，请执行前备份 /etc/asterisk 命令下的配置文件

第4章：安装Sangoma 驱动

1）下载Wanpipe驱动：下载地址：sangoma 驱动下载
2）保存文件到 /usr/src 命令下
3）减压 wanpipe

tar xvfz wanpipe-<version>.tgz
cd wanpipe-<version>
make     // 确认成功安装，无任何报错信息
make install   // 确认成功安装，无任何报错信息
 ./Setup install  // 执行脚本安装编译，确认没有任何报错信息。

如果安装Sangoma A116E

./Setup install --dahdi-chunk=40

执行 setup 安装过程时的选项：

[root@localhost wanpipe-7.0.5]# ./Setup install
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE INSTALLATION

You are about to install WANPIPE Multi-Protocol
TDM Voice & WAN Router into your system.

This script will examine your system, then install, create
and/or modify necessary files and directories.

You must have Linux Kernel Headers along with
full development tools (i.e. GNU C compiler and utilities)
installed in order to be able to install this product.

This script will automatically compile all WANPIPE kernel
drivers and install them in their appropriate directory.

If you are installing Wanpipe for ASTERISK/ZAPTEL this
script will will prompt you for zaptel source location.

If you have previoulsy installed WANPIPE, this release
will overrite/upgrade full release without the need to
uninstall first!

IMPORTANT:
It is always recommended to say YES to all options
prompted during the install!

Please visit: http://wiki.sangoma.com for more info.

Would you like to install WANPIPE now? [y] (y/n) y // 选择y
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

Fixing file permissions...

Verifying files and fixing permissions ...Done

Warning: Wanpipe Modules are currently running!
Its recommended to unload Wanpipe Modules before proceeding
with installation.

Would you like to proceed? (y/n) y
Checking for C developement tools ...(gcc) OK
Checking for C++ developement tools ...OK
Checking for Make utility ...OK
Checking for ncurses library ... OK
Checking for Perl developement tools ...OK
Checking for AWK ...OK
Checking for FLEX ...OK
Checking for Patch ...OK
Checking for libtermcap-devel...OK
Checking for bison...OK
Checking for libtool...OK

Press [Enter] to continue... // 确认以上支持包成功安装。输入 Enter 键
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

Installing WANPIPE Device Drivers: Linux KERNEL

To integrate WANPIPE Multi-Protocol Voice & WAN Router
modules into the Linux kernel, the kernel has to be
updated with latest wanpipe sources. Install will only
modify existing wanpipe source that is already in the
Kernel.

IMPORTANT:
It is always recommended to say YES to all options
prompted during the install!

----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

Please specify absolute path name of your linux headers/source directory

Press Enter for Default: /lib/modules/2.6.32-358.23.2.el6.x86_64/build

#>
Setting linux directory to /lib/modules/2.6.32-358.23.2.el6.x86_64/build

Upgrading WANPIPE kernel documentation ...Done.

Installing WANPIPE include headers ...Done.

WANPIPE device drivers upgraded successfully!

Press [Enter] to continue... // 输入Enter 键
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE KERNEL DRIVER COMPILATION

The next step in WANPIPE installation involves compiling
WANPIPE kernel modules.

This script will compile and install WANPIPE modules
into the currently running linux kernel.

For greater customization you will be prompted to
select which Protocol/Drivers you would like to
build into the WANPIPE kernel modules.

Wanpipe for Asterisk/Dahdi/Zaptel
Default for Asterisk/Dahdi/Zaptel
Wanpipe for Wan Routing/API
Default for Wan/IP Routing and Data API
Wanpipe for Asterisk SMG/SS7
Default for Asterisk SS7
Wanpipe for TDM API
Default for FreeSwitch and Voice API

Custom Compilation:
------------------
Customise WANPIPE driver compilation to add only the
protocols that you need. This way one can reduce
the size of the WANPIPE kernel drivers.

Refer to http://wiki.sangoma.com for more info

grep: /lib/modules/2.6.32-358.23.2.el6.x86_64/build/include/include/autoconf.h: No such file or directory
grep: /lib/modules/2.6.32-358.23.2.el6.x86_64/build/include/include/autoconf.h: No such file or directory
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

Please Select Compilation Mode

1. WAN Protocols Support
Protocols: Frame Relay, CHDLC, PPP, ATM, X25, ADSL, TDM API
Default for: Wan Routing, Data & Voice API devel.

2. Asterisk/Dahdi Support
Asterisk protocols: libpri (PRI,BRI), Analog (FXO/FXS), libss7 (SS7)
Default for: Asterisk

3. Asterisk/Dahdi + WAN Protocol Support

4. TDM API (libsangoma)
Protocols: TDM API (libsangoma) on AFT adapters:
Default for: FreeSWITCH, Yate, Sunrise
Custom voice development

5. Custom Compilation Mode
Specify protocols to be added into the WANPIPE
kernel drivers.

6. Deprecated: SMG (BRI) (Asterisk SMG/BRI [Use Asterisk/Dahdi option 2 instead])

7. Deprecated: SMG (BRI) + Asterisk/Dahdi [Use Asterisk/Dahdi option 2 instead]

Please select (1-7) [Default: 1]: 2 // 现在 2 在asterisk 环境下安装E1 卡

Looking for zaptel/dahdi directory in /usr/src ...
-------------------------------------------
1 : /usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1
------------------------------------------
------------------------------------------
m : Enter zaptel path manually

(ctrl-c to Exit)
Please select working zaptel directory [1-1][m]: 1 // 输入 1 选择 dahdi 源代码安装路径，如果dahdi 没有安装在默认的路径下，需要手动添加路径

Enabling the TDM Voice Asterisk Support

Dahdi HW HDLC Support Detected: Enabling DCHAN Feature
Native Dahdi HW HDLC Support Detected - No patch required
Dahdi source unmodified

Checking for UDEV Zaptel compatibility... Dahdi installed, no need to add UDEV rules
Enabling the AFT TE1 Support

Checking for SMP support ...Enabled.

Checking current processor type ...x86_64

Wan Update Flags: -DAF_WANPIPE_2612_FORCE_UPDATE -DWANPIPE_MOD_266_FORCE_UPDATE
Checking fo regparm: Disabled

--------------------------------------------------
CFLAGS: gcc -Wp,-MD,.wanpipe.o.d -nostdinc -iwithprefix include -D__LINUX__ -Dlinux -D__KERNEL__ -I/usr/include/wanpipe -I/lib/modules/2.6.32-358.23.2.el6.x86_64/build/include -DMODULE -DAF_WANPIPE_2612_FORCE_UPDATE -DWANPIPE_MOD_266_FORCE_UPDATE
--------------------------------------------------

Compiling General WANPIPE Driver for 2.6.X Kernel .....Done.

WAN HWEC module enabled and compiled!
Linking Wanpipe Driver and protocols ...Done.

Updating Kernel Modules ...Done.

Visually Confirm that driver compilation was successful! (y/n) y // 选择 y
Compilation Successful.
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE META CONFIGURATION

There are two configuration files associated with WANPIPE.

1) /usr/src/wanpipe-7.0.5/wanrouter.rc:
- defines locations of important files such as lock
and configuration files as well as start/stop
order of multiple WANPIPE devices.
2) /usr/src/wanpipe-7.0.5/wanpipe1.conf:
- main configuration file for each WANPIPE device.
- defines interfaces, hardware and protocol information.
- this file can be created using the 'wancfg' GUI
utility or manually based on sample files located
in /etc/wanpipe/samples.

Please read the WanpipeInstallation.(pdf/txt) manual for further
information.

Press [Enter] to continue... // 输入 Enter

Wanpipe META config file found in /etc/wanpipe directory

Wanpipe startup sequence: wanpipe1

Would you like to keep the original wanpipe startup sequence? (y/n) y // 选择 y

Please specify a desired location for WANPIPE configuration files.

(Press Enter for Default: /etc/wanpipe)

Please specify a desired location for WANPIPE interface files.

(Press Enter for Default: /etc/wanpipe/interfaces)

<specify path:> // 摁Enter 键， 板卡配置文件路径

Please specify a location for WANPIPE binary, firmware files.

(Press Enter for Default: /etc/wanpipe/firmware)

<specify path:> //摁 Enter 键。
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE UTILITIES SETUP

WANPIPE utilities are used to:
1) create configuration files: for Zaptel and Asterisk
/usr/sbin/wancfg_dahdi#Dahdi and Asterisk
/usr/sbin/wancfg_zaptel#Zaptel and Asterisk
/usr/sbin/wancfg_smg#BRI/SS7, Dahdi/Zaptel and Asterisk
/usr/sbin/wancfg_tdmapi#TDM API
2) create WANPIPE WAN/IP configuration files.
(/usr/sbin/wancfg)
3) start,stop,restart individual/all devices and interfaces.
(/usr/sbin/wanrouter)
4) debug line, protocol and driver problems.
(/usr/sbin/wanpipemon)
5) aid in WANPIPE API development
(/etc/wanpipe/api)

Refer to the WanpipeInstallation.(pdf/txt) for more information.

Press [Enter] to continue... // 摁 Enter
Compiling WANPIPE LibSangoma API library ...Done.

Compiling WANPIPE LibStelephony API library ...Done.

Compiling WANPIPE Utilities ...Done.

Compiling WANPIPE WanCfg Utility ...Done.

Compiling WANPIPE LibStelephony API Library ... skipped, not required.

Compiling WANPIPE API Development Utilities ... skipped, not required.

Compiling WANPIPE HWEC Utilities ...Done.

WANPIPE Environment Setup Complete !!!

Press [Enter] to continue... // 摁 Enter 键
Installing WANPIPE Files ... !
Installing WANPIPE Utilities in /usr/sbin
Installing wanrouter.rc in /etc/wanpipe
Installing wanpipe libraries in /etc/wanpipe
Installing firmware in /etc/wanpipe/firmware
Installing documentation in /usr/share/doc/wanpipe
cp: omitting directory `doc/man'
Installing sample api code in /etc/wanpipe/api
Installing AFT Firmware update utility in /etc/wanpipe/util
Installing driver headers in /etc/wanpipe/api/include/linux
Installing Hardware Echo Cancel Utilites
Press [Enter] to continue... // 摁 Enter 键
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE BOOTSTRAP CONFIGURATION

Your system uses System V -style initialization scripts. You have an option
to add router start-up script to those scripts so that the router will start
automatically when system enters multi-user mode and shut down when it enters
single-user mode or when it is halted.

i.e. By selecting this option WANPIPE will startup on system bootup and
stop on system shutdown.

Would you like to install WANPIPE start-up scripts? (y/n) y // 输入 y

########################################################################
# Sangoma Wanpipe #
# Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script #
# v2.39 #
# Sangoma Technologies Inc. #
# Copyright(c) 2013. #
########################################################################

Current boot level is 3

Wanrouter boot scripts configuration...

Removing existing wanrouter boot scripts...OK
Verifying Zaptel boot scripts...
Enabling wanrouter boot scripts ...(level:8)
Enabling wanrouter shutdown scripts ...(level:91)
----------------------------------------------------------
WANPIPE v7.0.5 Installation Script
Copyright (c) 1995-2013, Sangoma Technologies Inc.
----------------------------------------------------------

WANPIPE INSTALLATON: COMPLETE

WANPIPE installation is now complete. WANPIPE kernel drivers
and configuration/debug utilities have been compiled and installed.

1) Proceed to configure the WANPIPE drivers:
Asterisk/Dahdi : /usr/sbin/wancfg_dahdi
Asterisk/Zaptel : /usr/sbin/wancfg_zaptel
TDM API : /usr/sbin/wancfg_tdmapi
SMG SS7/BRI/PRI : /usr/sbin/wancfg_smg
WAN Routing/API : /usr/sbin/wancfg
2) Use the /usr/sbin/wanrouter startup script to start and stop
the router. (eg: wanrouter start)
3) To uninstall WANPIPE package run ./Setup remove

Please read http://wiki.sangoma.com for further instructions.

Wanpipe / Zaptel Configuration
==============================

wancfg_zaptel configurator can create all wanpipe config files
for ZAPTEL including /etc/zaptel.conf file.
Optionally: the configurator can also create Asterisk zapata.conf
-----------------------------------------------------
Would you like to configure wanpipe devices for DAHDI? (y/n) y // 输入 y

########################################################################
# Sangoma Wanpipe #
# Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script #
# v2.39 #
# Sangoma Technologies Inc. #
# Copyright(c) 2013. #
########################################################################

Would you like to generate /etc/asterisk/chan_dahdi.conf
1. YES
2. NO
[1-2]:1 // 输入1 ， 创建默认chan_dahdi.conf 文件

-------------------------------------------------------
Configuring T1/E1 cards [A101/A102/A104/A108/A116/T116]
-------------------------------------------------------
A101 detected on slot:4 bus:4

-----------------------------------------------------------
Configuring port 1 on A101 slot:4 bus:4.
-----------------------------------------------------------

Select media type for AFT-A101 on port 1 [slot:4 bus:4 span:1]
1. T1
2. E1
3. Unused
4. Exit
[1-4]:2 // 选择 2， 配置为E1 类型

Configuring port 1 on AFT-A101 as E1, line coding:HDB3, framing:CRC4
1. YES - Keep these settings
2. NO - Configure line coding and framing
[1-2, ENTER='YES']:2 // 是否安装HDB3， CRC4 方式创建文件；如果不带CRC4， 选择2， 修改配置文件

Select line coding for port 1 on 101
1. HDB3
2. AMI
[1-2, ENTER='HDB3']:1 // 选择 1

Select framing for port 1 on 101
1. CRC4
2. NCRC4
3. UNFRAMED
[1-3, ENTER='CRC4']:2 // 选择不支持CRC4

Select clock for AFT-101 on port 1 [slot:4 bus:4 span:1]
1. NORMAL
2. MASTER
[1-2]:1 // 选择 1

Select signalling type for AFT-101 on port 1 [slot:4 bus:4 span:1]
1. Zaptel/Dahdi - PRI CPE
2. Zaptel/Dahdi - PRI NET
3. Zaptel/Dahdi - E & M
4. Zaptel/Dahdi - E & M Wink
5. Zaptel/Dahdi - FXS - Loop Start
6. Zaptel/Dahdi - FXS - Ground Start
7. Zaptel/Dahdi - FXS - Kewl Start
8. Zaptel/Dahdi - FX0 - Loop Start
9. Zaptel/Dahdi - FX0 - Ground Start
10. Zaptel/Dahdi - FX0 - Kewl Start
11. Sangoma SMG/sangoma_prid- PRI CPE
12. Sangoma SMG/sangoma_prid- PRI NET
[1-12]:1 // 选择CPE 用户侧。运营商是网络侧

Select switchtype for AFT-101 on port 1
1. National ISDN 2
2. Nortel DMS100
3. AT&T 4ESS
4. Lucent 5ESS
5. EuroISDN
6. Old National ISDN 1
7. Q.SIG
[1-7]:5 // 选择5

Would you like to enable hardware DTMF detection?
1. YES
2. NO
[1-2, ENTER='YES']:1 // 选择 1

Would you like to enable hardware fax detection?
1. YES
2. NO
[1-2, ENTER='NO']:1 // 选择 1

Configuring port 1 on AFT-101 as a full E1
1. YES - Use all channels
2. NO - Configure for fractional
[1-2, ENTER='YES']:1 // 使用所有通道

Select dialplan context for AFT-101 on port 1
1. from-pstn
2. from-internal
3. Custom
[1-3]:1 // 选择1

Port 1 on AFT-A101 configuration complete...
Press any key to continue: // 摁Enter 继续检测安装

T1/E1 card configuration complete.
Press any key to continue: // 摁 Enter 键，进行其他板卡检测
-------------------------------------------
Configuring ISDN BRI cards [A500/B500/B700]
-------------------------------------------

No Sangoma ISDN BRI cards detected

Press any key to continue: // 摁 enter
------------------------------------
Configuring GSM cards [W400]
------------------------------------

No Sangoma GSM cards detected

Press any key to continue: // 摁Enter
------------------------------------
Configuring analog cards [A200/A400/B600/B610/B700/B800]
------------------------------------
------------------------------------
Configuring USB devices [U100]
------------------------------------

###################################################################
# SUMMARY #
###################################################################

1 T1/E1 port(s) detected, 1 configured
0 ISDN BRI port(s) detected, 0 configured
0 analog card(s) detected, 0 configured
0 GSM card(s) detected, 0 configured
0 usb device(s) detected, 0 configured

Configurator will create the following files:
1. Wanpipe config files in /etc/wanpipe
2. Dahdi config file /etc/dahdi/system.conf
3. chan_dahdi config file /etc/asterisk/chan_dahdi.conf

Your original configuration files will be saved to:
1. /etc/dahdi/system.conf.bak
2. /etc/asterisk/chan_dahdi.conf.bak

Your configuration has been saved in /etc/wanpipe/debug-2013-11-21.tgz.
When requesting support, email this file to techdesk@sangoma.com

###################################################################

Configuration Complete! Please select following:
1. YES - Continue
2. NO - Exit
[1-2]:1 // 选择 1， 继续配置

Dahdi and Wanpipe configuration complete: choose action
1. Save cfg: Restart Asterisk & Wanpipe now
2. Save cfg: Restart Asterisk & Wanpipe when convenient
3. Save cfg: Stop Asterisk & Wanpipe now
4. Save cfg: Stop Asterisk & Wanpipe when convenient
5. Save cfg: Save cfg only (Not Recommended!!!)
6. Do not save cfg: Exit
[1-6]:2 // 选择 2 或者 3。

Stopping Asterisk...
Waiting for inactivity to perform halt

Stopping Wanpipe...

Shutting down wanpipe1 interface: w1g1
Shutting down device: wanpipe1
No devices running, Unloading Modules

Unloading Dahdi modules...
FATAL: Module dahdi is in use.
Error executing command:
modprobe -r dahdi // 忽略这些错误

Would you like to continue?
1. No - exit
2. YES
[1-2, ENTER='No']:1 2 // 选择2

Removing old configuration files...

Copying new Wanpipe configuration files...

Copying new Dahdi configuration file (/etc/dahdi/system.conf)...

Copying new chan_dahdi configuration files (/etc/asterisk/chan_dahdi.conf)...

Starting Wanpipe...

Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1
--> Loading ec image OCT6116-64S.ima...
Configuring interfaces: w1g1
done.

Loading Dahdi...
DAHDI Tools Version - 2.7.0.1

DAHDI Version: 2.7.0.1
Echo Canceller(s): HWEC
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

31 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to mg2
Setting echocan for channel 13 to mg2
Setting echocan for channel 14 to mg2
Setting echocan for channel 15 to mg2
Setting echocan for channel 16 to none
Setting echocan for channel 17 to mg2
Setting echocan for channel 18 to mg2
Setting echocan for channel 19 to mg2
Setting echocan for channel 20 to mg2
Setting echocan for channel 21 to mg2
Setting echocan for channel 22 to mg2
Setting echocan for channel 23 to mg2
Setting echocan for channel 24 to mg2
Setting echocan for channel 25 to mg2
Setting echocan for channel 26 to mg2
Setting echocan for channel 27 to mg2
Setting echocan for channel 28 to mg2
Setting echocan for channel 29 to mg2
Setting echocan for channel 30 to mg2
Setting echocan for channel 31 to mg2

Starting Asterisk...
Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?)

Listing Asterisk channels...

Chan Extension Context Language MOH Interpret Blocked State Description
pseudo default default In Service
1 from-pstn default In Service
2 from-pstn default In Service
3 from-pstn default In Service
4 from-pstn default In Service
5 from-pstn default In Service
6 from-pstn default In Service
7 from-pstn default In Service
8 from-pstn default In Service
9 from-pstn default In Service
10 from-pstn default In Service
11 from-pstn default In Service
12 from-pstn default In Service
13 from-pstn default In Service
14 from-pstn default In Service
15 from-pstn default In Service
17 from-pstn default In Service
18 from-pstn default In Service
19 from-pstn default In Service
20 from-pstn default In Service
21 from-pstn default In Service
22 from-pstn default In Service
23 from-pstn default In Service
24 from-pstn default In Service
25 from-pstn default In Service
26 from-pstn default In Service
27 from-pstn default In Service
28 from-pstn default In Service
29 from-pstn default In Service
30 from-pstn default In Service
31 from-pstn default In Service

Type "asterisk -r" to connect to Asterisk console

Wanrouter start complete...
Current boot level is 3

Wanrouter boot scripts configuration...

Removing existing wanrouter boot scripts...OK
Would you like wanrouter to start on system boot?
1. YES
2. NO
[1-2]:1 // 选择 1

Verifying Dahdi boot scripts...
Verifying Dahdi boot scripts...Enabled (level:13)
Verifying Dahdi shutdown scripts...Enabled (level:87)
Enabling wanrouter boot scripts ...(level:12)
Enabling wanrouter shutdown scripts ...(level:86)

Would you like to execute 'dahdi_cfg' each time wanrouter starts?
1. YES
2. NO
[1-2]:1 // 选择 1

Removing old smg_ctrl boot.....OK
Removing old smg_ctrl_safe boot.....OK
Sangoma cards configuration complete, exiting...

You have new mail in /var/spool/mail/root
[root@localhost wanpipe-7.0.5]# 到此，板卡配置完成。如果是2，4，8，或者16E1板卡，脚本在安装过程中会自动检测
第2口，第3口，依此类推。重复执行相应的次数。

以下信息是驱动安装时的提示一些特别说明信息，请选择正确的选项。如果选择错误，可以重新执行Setup-sangoma 来重新配置.
以下信息是安装过程中对中国用户的选项，如果成功安装，可以跳过步骤 4.

4）'''执行脚本安装过程中，中国用户需要选择的选项''',请小心操作：
Select media type->E1  // 支持中国E1
Select linecode-> HDB3  // E1接口支持两种线路编解码格式：AMI格式和HDB3格式。默认HDB3
Select framing-> NCRC4  // 是否需要支持CRC4 校验，如果不支持选择此项。大多数中国客户使用NCRC4
Select Clock-> Normal
Select Signalling type-> PRI CPE  // 运营商端上NET 网络侧，本地必须选择CPE 用户侧
Select switchtype -> EuroISDN
Select Configure port for full use->yes
Select Dialplan context-> PSTN   // 注意，到这一步，一个端口就算配置完成了，脚本会重复配置 第2 口，3口。。直到配置完所有的板卡端口。
Configuration complete-> Yes
Dahdi and Wanpepe configuration complete-> 选择 2
would you like to continue->Yes
would you like  wanrouter to start on system boot-> yes
would you like to execute dahdi_cfg each time wanrouter starts-> 选择 1

第5章：配置驱动通道

脚本配置完成以后，执行这个命令：

wanrouter hwprobe

如果可以正确显示板卡信息，和端口信息，说明板卡可以正常工作。如果出现报错信息，请联系sangoma中国
邮箱：james.zhu@hiastar.com

检查Wanpipe 配置文件

脚本会自动生成wanpipe 配置文件,在 /etc/wanpipe 目录下，自动生成每个端口文件 /etc/wanpipe/wanpipe1.conf
wanpipe2.conf wanpipeX.conf 文件。 X 代表端口数。多少端口会有多少个相应的配置文件。
例如，以下是端口1 的配置参数。

#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE 	= AFT
S514CPU 	= A
CommPort 	= PRI
AUTO_PCISLOT 	= NO
PCISLOT 	= 4    // 绑定了PCI 4 插槽，如果换PCI插槽，需要重新执行脚本配置板卡
PCIBUS  	= 22
FE_MEDIA	= E1  
FE_LCODE	= HDB3  // 线路编码
FE_FRAME	= NCRC4
FE_LINE		= 1
TE_CLOCK 	= NORMAL // 本地是从时钟，从运营商获得时钟。
TE_REF_CLOCK    = 0
TE_SIG_MODE     = CAS
TE_HIGHIMPEDANCE	= NO
TE_RX_SLEVEL    = 430
LBO 		= 120OH
FE_TXTRISTATE	= NO
MTU 		= 1500
UDPPORT 	= 9000
TTL		= 255
IGNORE_FRONT_END = NO
TDMV_SPAN	= 1
TDMV_DCHAN	= 16  // D 通道信令控制
TDMV_HW_DTMF	= YES
TDMV_HW_FAX_DETECT = YES

[w1g1]
ACTIVE_CH	= ALL
TDMV_HWEC	= YES   // 带硬件回声模块的E1板卡
MTU 		= 8

注意，如果修改了任何 wanpipeX.conf 或者system.conf 文件，都需要重新启动wanpipe 驱动(建议重新启动服务器环境）。自动生成 /etc/dahdi/system.conf 自动生成 /etc/asterisk/chan_dahdi.conf

检查硬件回声模块

执行命令 wanrouter hwprobe

A200d : 32
A101d : 32
A102d : 64
A104d : 128
A108d : 256
A500d : 64

如果贵公司购买的板卡是带回声抑制模块的板卡，例如 A101D，应该显示 32；如果结果显示是0，请联系sangoma 中国：james. zhu@hiastar.com

检查dahdi 配置文件 /etc/asterisk/chan_dahdi.conf

注意，此配置文件是4E1板卡配置文件，根据购买的板卡端口数量，配置文件的通道数有所不同！

#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2011-10-09
#Dahdi Channels Configurations 
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak
loadzone=cn
defaultzone=cn

#Sangoma A104 port 1 [slot:4 bus:22 span:1] <wanpipe1>
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
hardhdlc=16   
# echocanceller=mg2,1-15,17-31  // 如果带硬件回声模块，需要注释掉这一行配置。如果软件回声模块，打开注释。
#Sangoma A104 port 2 [slot:4 bus:22 span:2] <wanpipe2>
span=2,2,0,ccs,hdb3
bchan=32-46,48-62
# echocanceller=mg2,32-46,48-62
hardhdlc=47

#Sangoma A104 port 3 [slot:4 bus:22 span:3] <wanpipe3>
span=3,3,0,ccs,hdb3
bchan=63-77,79-93
# echocanceller=mg2,63-77,79-93
hardhdlc=78

#Sangoma A104 port 4 [slot:4 bus:22 span:4] <wanpipe4>
span=4,4,0,ccs,hdb3
bchan=94-108,110-124
# echocanceller=mg2,94-108,110-124
hardhdlc=109

检查asterisk 应用层chan_dahdi.conf 通道配置文件

;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2011-10-09
;Dahdi Channels Configurations 
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]   // 默认的sangoma 脚本可能丢失此标签，需要手动添加

[channels]  // 默认的sangoma 脚本配置可能丢失此标签，需要手动添加，否则asterisk CLI命令: dahdi show channels 无任何显示结果
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
pridialplan=local  // 支持PRI 拨号规则本地用户
prilocaldialplan=local
;Uncomment these lines if you have problems with the disconection of your analog lines

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

以下是dahdi-channels.conf 文件，包含4个端口的124个通道


; Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) 
group=0
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31   // 如果是A101 线路，显示31 路
context = default
;group = 63

; Span 2: WPE1/1 "wanpipe2 card 1" 
group=1
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
context = default
;group = 63

; Span 3: WPE1/2 "wanpipe3 card 2" 
group=2
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 63-77,79-93
context = default
;group = 63

; Span 4: WPE1/3 "wanpipe4 card 3" 
group=3
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 94-108,110-124
context = default
;group = 63

检查通道的状态

Sangoma 语音板卡的安装步骤已经完成，如果以上这些步骤没有任何错误的话，客户在呼叫之前需要
确认以下几个技术参数，然后再进行通话测试。

1) 登录系统后台，执行命令 dmesg， 检查打印信息，确认没有任何和板卡dahdi相关的报错信息。
2) 启动asterisk，执行asterisk -r， 进入asterisk CLI 后台，确认：
3) 执行命令：dahdi show channels， 如果显示有通道数量，说明通道配置正确。
4) 执行 pri show spans, 如果显示了spans 的数量，而且是 up，active 说明系统正常，可以呼入测试。
5）执行 pri show spans，如果状态显示是down  inactive/active， 检查配置或者硬件板卡。

在5）执行以后，如果出现down，inactive，状态退出asterisk CLI 命令。
确认wanrouter start 已经执行，并且成功启动，执行Sangoma工具检测命令:

wanpipemon -i w1g1 -c Ta  // wX 代表 端口X，现在是w1 代表 1口，w2 代表2口，以此类推。
**** w1g1: E1 Rx Alarms (Framer) *****
ALOS:OFF| LOS:OFF
RED:ON| AIS:OFF
LOF:ON| RAI:ON    // 确认所有告警信息是OFF 状态，如果是ON 状态，检查CRC4， 物理连接，BNC头TX/RX 接线顺序。
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit:OFF
Open Circuit:OFF
Loss of Signal:OFF
***** w1g1: E1 Tx Alarms *****
AIS:OFF| YEL:ON
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation: 120472300
Far End Block Errors: 0
CRC4 Errors: 0
FAS Errors: 48
Rx Level: -15db to -17.5db  // 注意 Rx level 显示的值。如果例如-32db to -36db， -26db to -29db

说明RJ48或者BNC头有物理检测不良，或者BNC头接反（tx/rx长短方向对调），请检查更换！

请运营商技术人员现场做回环测试，确认线路正常。
检查BNC RX/TX 是否接反，或者RJ48配线，水晶头是否良好。

以下是正常的线路连接 Rx level:

执行命令：wanpipemon -i w1g1 -c Ta， 注意以下所有告警信息是正常状态，说明物理连接正常。如果有告警信息是ON状态，需要重新检查。

***** w1g1: E1 Rx Alarms (Framer) *****
ALOS: OFF  |  LOS:  OFF
RED:   OFF  |  AIS:  OFF
LOF:    OFF  | RAI:  OFF
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit: OFF
Open Circuit: OFF
Loss of Signal: OFF
***** w1g1: E1 Tx Alarms *****
AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 330
Far End Block Errors : 4215
CRC4 Errors : 0
FAS Errors : 3

Rx Level : > -2.5db // 良好的线路物理连接，值应该是-2.5db

以上命令中，如果满足第4步的要求，可以进行呼入测试；反之，请检查配置或者联系sangoma 中国（james.zhu@hiastar.com）

第6章：测试呼叫

这里，我们介绍的只是一个非常简单的呼入呼出例子。客户可以根据自己的业务需求开发呼叫中心，录音，
语音IVR等等应用业务。测试用例的目的是测试语音板卡是否正常工作。测试呼叫之前，需要修改拨号规则配置文件
/etc/asterisk/extensions.conf.
添加以下拨号规则，重新在asterisk 后台执行 relaod 命令，重新加载修改的数据，使之生效！
建议用户首先测试呼入的功能，然后测试呼出的功能！

呼入测试

[from-pstn]   // 注意，这里的from-pstn 必须对应 chan_dahdi.conf 里面的context 
exten => s,1,Answer() // 应答一个呼入电话
exten => s,n,Playback(cc_welcome) // 播放欢迎信息，呼叫者将会听到播放的语音。
exten => s,n,Hangup() // 播放结束，挂机

呼出测试

如果呼入测试正常，可以做呼出测试。
1) 呼出测试之前，必须在extensions.conf 文件添加以下内容，然后建立终端分机或者软电话。

[from-internal]
exten => 100,1,Dial(dahdi/1/18665XXXXXX) 
exten => 100,2,Hangup

2) 使用101分机，拨100 呼出测试，通过dahdi 通道1呼出到18665XXXXXXX 手机。当然可以通过任何一个B通道呼出到
任何一个有效的电话号码。
3）如果呼入呼出正常，说明语音板卡可以正常工作。

第7章：E1语音板卡知识库

1）Sangoma A1XX 线路数字语音板卡支持E1 支持30B+D PRI（PRA），速率是2.048Mbit/s ，
默认使用成复帧的E1中,除了第0时隙外,第16时隙（D 通道）是用于传输信令的,只有第1（B 通道）到15,
第17到第31共30个时隙可用于传输有效数据或者语音
2）安装sangoma 语音板卡时需要注意阻抗/帧结构/CRC4校验，如果以上数据出现双方不匹配，可能导致
不通/误码/滑码/失步等问题，请联系运营商确认以上参数必须和本地完全匹配。
3) Sangoma 板卡的主要应用环境：呼叫中心，电子传真，企业IVR服务，落地，语音转换。
4) Sangoma 板卡是否支持满配？是的，1：1 满配。保证30路满负荷，语音清晰。
5) 查看E1语音板卡的物理连接是否良好，E1线路状态诊断工具
6) E1 PRI线路听不到彩铃或者语音提示,修改拨号规则(extensions.conf)，在dial 命令前添加 progress（）,例如：

exten => _X.,1, Progress()
exten => _X.,n, Dial(dahdi/g0/1866512XXXX)