FreePBX-13 Centos-7 源代码安装

Centos-7 环境下安装 FreePBX 13

初始化 系统设置

用户必须是ROOT 用户权限!

用户必须关闭 selinux。 以免引起其他安装问题

Disable selinux

在 /etc/sysconfig/selinux 文件中修改以下几行:

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/sysconfig/selinux

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/selinux/config

重新启动系统，执行命令 'sestatus'，结果应该是：

SELinux status: disabled

Update Your System

yum -y update

yum -y groupinstall core base "Development Tools"

安装其他的支持包和依赖包

yum -y install lynx mariadb-server mariadb php php-mysql php-mbstring tftp-server \

  httpd ncurses-devel sendmail sendmail-cf sox newt-devel libxml2-devel libtiff-devel \

  audiofile-devel gtk2-devel subversion kernel-devel git php-process crontabs cronie \

  cronie-anacron wget vim php-xml uuid-devel sqlite-devel net-tools gnutls-devel php-pear

Install Legacy Pear requirements

pear install Console_Getopt

Firewalld Basic Configuration

开放80端口，管理员界面可以访问此端口

firewall-cmd --zone=public --add-port=80/tcp --permanent

firewall-cmd --reload

Enable and Start MariaDB

安装MariaDB，确保正常运行，这样freepbx能够正常工作，自动启动工作。

systemctl enable mariadb.service

systemctl start mariadb

mysql_secure_installation

此提示要求输入当前用户密码。因为用户已经安装了MySQL，此输入为空，按ENTER键。此提示要求用户设置root 密码。请不要设置用户密码。在脚本运行时，我们将会自动创建。其他引导设置可以输入YES。

Enable and Start Apache

FreePBX 使用Apache 服务器，所以页面服务器必须是启动状态。

systemctl enable httpd.service

systemctl start httpd.service

'''Install Dependencies for Google Voice (if required)'''

'''Install iksemel

''' '''

cd /usr/src

wget https://iksemel.googlecode.com/files/iksemel-1.4.tar.gz

tar xf iksemel-*.tar.gz

rm -f iksemel-1.4.tar.gz

cd iksemel-*

./configure

make

make install

'''Add the Asterisk User'''

adduser asterisk -M -c "Asterisk User"

'''Install and Configure Asterisk'''

'''Download Asterisk source files.'''

cd /usr/src

wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz

wget -O jansson.tar.gz https://github.com/akheron/jansson/archive/v2.7.tar.gz

wget http://www.pjsip.org/release/2.4/pjproject-2.4.tar.bz2

Compile and install DAHDI

如果用户没有安装Asterisk 语音卡可以忽略安装Dahdi（特别是虚拟机安装，无需此步骤）。

cd /usr/src

tar xvfz dahdi-linux-complete-current.tar.gz

tar xvfz libpri-1.4-current.tar.gz

rm -f dahdi-linux-complete-current.tar.gz libpri-1.4-current.tar.gz

cd dahdi-linux-complete-*

make all

make install

make config

cd /usr/src/libpri-1.4.*

make

make install

Compile and install pjproject

cd /usr/src

tar -xjvf pjproject-2.4.tar.bz2

rm -f pjproject-2.4.tar.bz2

cd pjproject-2.4

CFLAGS='-DPJ_HAS_IPV6=1' ./configure --prefix=/usr --enable-shared --disable-sound\

 --disable-resample --disable-video --disable-opencore-amr --libdir=/usr/lib64

make dep

make

make install

编译安装jansson

cd /usr/src

tar vxfz jansson.tar.gz

rm -f jansson.tar.gz

cd jansson-*

autoreconf -i

./configure --libdir=/usr/lib64

make

make install

Compile and install Asterisk

cd /usr/src

tar xvfz asterisk-13-current.tar.gz

rm -f asterisk-13-current.tar.gz

cd asterisk-*

contrib/scripts/install_prereq install

./configure --libdir=/usr/lib64

contrib/scripts/get_mp3_source.sh

make menuselect

You will be prompted at the point to pick which modules to build. Most of them will already be enabled, but if you want to have MP3 support (eg, for Music on Hold), you need to manually turn on 'format_mp3' on the first page.

After selecting 'Save & Exit' you can then continue

make

make install

make config

ldconfig

chkconfig asterisk off

安装高清语音文件

The 'make install' above installs a standard low-quality base sound file by default. This is suitable if you are on a small, underpowered system (such as a Rasberry Pi), but on a larger system you should install higher quality soundfiles. Note that this installs the (8khz) 'wav' soundfiles and G722 (High Definition 'Wideband') audio.

cd /var/lib/asterisk/sounds

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz

tar xvf asterisk-core-sounds-en-wav-current.tar.gz

rm -f asterisk-core-sounds-en-wav-current.tar.gz

tar xfz asterisk-extra-sounds-en-wav-current.tar.gz

rm -f asterisk-extra-sounds-en-wav-current.tar.gz

# Wideband Audio download

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-g722-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz

tar xfz asterisk-extra-sounds-en-g722-current.tar.gz

rm -f asterisk-extra-sounds-en-g722-current.tar.gz

tar xfz asterisk-core-sounds-en-g722-current.tar.gz

rm -f asterisk-core-sounds-en-g722-current.tar.gz

设置Asterisk 权限

chown asterisk. /var/run/asterisk

chown -R asterisk. /etc/asterisk

chown -R asterisk. /var/{lib,log,spool}/asterisk

chown -R asterisk. /usr/lib64/asterisk

chown -R asterisk. /var/www/

安装配置FreePBX

安装前修改Apache设置

sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php.ini

sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/httpd/conf/httpd.conf

sed -i 's/AllowOverride None/AllowOverride All/' /etc/httpd/conf/httpd.conf

systemctl restart httpd.service

下载安装FreePBX

cd /usr/src

wget http://mirror.freepbx.org/modules/packages/freepbx/freepbx-13.0-latest.tgz

tar xfz freepbx-13.0-latest.tgz

rm -f freepbx-13.0-latest.tgz

cd freepbx

./start_asterisk start

./install -n

搞定!

现在用户可以启动FreePBX，访问FreePBX界面，设置管理员帐户和邮箱。