基本设置General Settings (2.10 and lower)

来自最权威最新完整开源SIP，语音通信，融合通信中文技术文档资料，提供详细的Asterisk Freepbx, FreeSBC, 免费会话边界控制器，网关，语音板卡，IPPBX，SBC配置资料-asterisk,freepbx，freesbc 用户手册 界面配置，呼叫路由，IVR, 网关对接，拨号规则，SIP 分机呼叫，pjsip, IVR, 录音, CDR, 队列呼叫，振铃组,CLI 命令中文资料手册
James.zhu（讨论 | 贡献）2015年10月29日 (四) 15:11的版本 （创建页面，内容为“'''General Settings 基本设置用户使用指南''' ''注意'' 此模块仅使用在2.10 以下版本 '''什么是基本设置用户指南''' The General Settin...”）

(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至： 导航、 搜索

General Settings 基本设置用户使用指南

注意 此模块仅使用在2.10 以下版本

什么是基本设置用户指南

The General Settings Module is a module that was used in FreePBX 2.10 and lower to set a variety of general settings.  Starting in FreePBX 2.11, the General Settings Module has been eliminated and the settings that were contained in that Module have been moved to other modules.

How Do I Get to the General Settings Module?

To access the General Settings Module in FreePBX 2.10, access the graphical user interface using a web browser.  Click on the "Settings" pull down menu at the top and then select "General Settings".

General%20Settings%20Pulldown.png

What Do Each of the General Settings Options Mean?

General%20Settings%201.png

 

You can get a general description of what each option does by placing your mouse on the question mark to the right of the option (in FreePBX 2.10) or on the text of the option (in FreePBX 2.9 and earlier), and a tooltip will appear that explains the option.  Make the changes that you desire, then scroll to the bottom, click "Submit Changes," and then click the red "Apply Config" bar at the top of the screen.

There are several options that you may want to consider changing from the default:

Asterisk Dial Command Options:  r

Ringtime Default:  Your preference

Direct Dial Voicemail Prefix:   *86

Do Not Play "please leave message after tone" to caller:  Checked

Operator Extension:  Your preference

24-hour format:  No

Allow Anonymous Inbound SIP Calls:  Yes

Update Email:  Your Preference

Note:  If you choose to "Allow Anonymous Inbound SIP Calls," you should also create a catch-all Inbound Route called "DeadRestricted" that routes unmatched calls to "Terminate Call:Hangup."  See the instructions for the Inbound Routes Module for more details.

Where did the General Settings Options Go in FreePBX 2.11 and later?

In FreePBX 2.11, this module has been eliminated, and the settings have been moved to the Advanced Settings Module, the Module Admin Module, or the Voicemail Admin Module as indicated below:

 

Dialing Options/ALL -> Advanced Settings/Dialplan and Operational


Call Recording/Extension Recording Override -> ELIMINATED

Call Recording/Call Recording Format -> Advanced Settings/System Setup

 

Voicemail/Ringtime Default -> Advanced Settings/Dialplan and Operational

Voicemail/Direct Dial Voicemail Prefix -> Feature Codes

Voicemail/Direct Dial Voicemail Message Type -> Voicemail Admin/Dialplan Behavior

Voicemail/Voicemail Recording Gain -> Voicemail Admin/Dialplan Behavior

Voicemail/Operator Extension -> Voicemail Admin/Dialplan Behavior

Voicemail/Do not play "…" to caller -> Voicemail Admin/Dialplan Behavior

Voicemail/Voicemail VMX Locator -> Voicemail Admin/Dialplan Behavior

 

International Settings/Country Indications -> Advanced Settings/Dialplan and Operational

'International Settings/24-hour format -> Advanced Settings/Dialplan and Operational

 

Security Settings/Allow Anonymous Inbound ... -> Asterisk SIP Settings/Advanced General Settings

 

Online Updates - > Module Admin/Frog & Shield Image (upper right)

 

取自“http://freepbx.org.cn/wiki/index.php?title=基本设置General_Settings_(2.10_and_lower)&oldid=379”