“FreePBX-13 Centos-7 源代码安装”的版本间的差异

2015年10月18日 (日) 17:31的版本

Installing FreePBX 13 on CentOS 7

Initial System Setup

用户必须是ROOT 用户权限!

用户必须关闭 selinux.  selinux 以免引起其他安装问题

Disable selinux

In /etc/sysconfig/selinux , change the following lines:

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/sysconfig/selinux

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/selinux/config

reboot, and verify the selinux status by running 'sestatus'. It should say:

SELinux status: disabled

Update Your System

yum -y update

yum -y groupinstall core base "Development Tools"

''''安装其他的支持包和依赖包

yum -y install lynx mariadb-server mariadb php php-mysql php-mbstring tftp-server \

 httpd ncurses-devel sendmail sendmail-cf sox newt-devel libxml2-devel libtiff-devel \

 audiofile-devel gtk2-devel subversion kernel-devel git php-process crontabs cronie \

 cronie-anacron wget vim php-xml uuid-devel sqlite-devel net-tools gnutls-devel php-pear

Install Legacy Pear requirements

pear install Console_Getopt

Firewalld Basic Configuration

开放80端口，管理员界面可以访问此端口

firewall-cmd --zone=public --add-port=80/tcp --permanent

firewall-cmd --reload

Enable and Start MariaDB

安装MariaDB，确保正常运行，这样freepbx能够正常工作，自动启动工作。

systemctl enable mariadb.service

systemctl start mariadb

Now that our MariaDB database is running, we want to run a simple security script that will remove some dangerous defaults and lock down access to our database system a little bit

mysql_secure_installation

此提示要求输入当前用户密码。因为用户已经安装了MySQL，此输入为空，按ENTER键。此提示要求用户设置root 密码。请不要设置用户密码。在脚本运行时，我们将会自动创建。其他引导设置可以输入YES。

Enable and Start Apache

FreePBX 使用Apache 服务器，所以页面服务器必须是启动状态。

systemctl enable httpd.service

systemctl start httpd.service

Install Dependencies for Google Voice (if required)

Install iksemel

cd /usr/src

wget https://iksemel.googlecode.com/files/iksemel-1.4.tar.gz

tar xf iksemel-*.tar.gz

rm -f iksemel-1.4.tar.gz

cd iksemel-*

./configure

make

make install

Add the Asterisk User

adduser asterisk -M -c "Asterisk User"

Install and Configure Asterisk

Download Asterisk source files.

cd /usr/src

wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar.gz

wget -O jansson.tar.gz https://github.com/akheron/jansson/archive/v2.7.tar.gz

wget http://www.pjsip.org/release/2.4/pjproject-2.4.tar.bz2

Compile and install DAHDI

如果用户没有安装Asterisk 语音卡可以忽略安装Dahdi（特别是虚拟机安装，无需此步骤）。

cd /usr/src

tar xvfz dahdi-linux-complete-current.tar.gz

tar xvfz libpri-1.4-current.tar.gz

rm -f dahdi-linux-complete-current.tar.gz libpri-1.4-current.tar.gz

cd dahdi-linux-complete-*

make all

make install

make config

cd /usr/src/libpri-1.4.*

make

make install

Compile and install pjproject

cd /usr/src

tar -xjvf pjproject-2.4.tar.bz2

rm -f pjproject-2.4.tar.bz2

cd pjproject-2.4

CFLAGS='-DPJ_HAS_IPV6=1' ./configure --prefix=/usr --enable-shared --disable-sound\

 --disable-resample --disable-video --disable-opencore-amr --libdir=/usr/lib64

make dep

make

make install

Compile and Install jansson

cd /usr/src

tar vxfz jansson.tar.gz

rm -f jansson.tar.gz

cd jansson-*

autoreconf -i

./configure --libdir=/usr/lib64

make

make install

Compile and install Asterisk

cd /usr/src

tar xvfz asterisk-13-current.tar.gz

rm -f asterisk-13-current.tar.gz

cd asterisk-*

contrib/scripts/install_prereq install

./configure --libdir=/usr/lib64

contrib/scripts/get_mp3_source.sh

make menuselect

You will be prompted at the point to pick which modules to build. Most of them will already be enabled, but if you want to have MP3 support (eg, for Music on Hold), you need to manually turn on 'format_mp3' on the first page.

After selecting 'Save & Exit' you can then continue

make

make install

make config

ldconfig

chkconfig asterisk off

''''Install Asterisk Soundfiles.

The 'make install' above installs a standard low-quality base sound file by default. This is suitable if you are on a small, underpowered system (such as a Rasberry Pi), but on a larger system you should install higher quality soundfiles. Note that this installs the (8khz) 'wav' soundfiles and G722 (High Definition 'Wideband') audio.

cd /var/lib/asterisk/sounds

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz

tar xvf asterisk-core-sounds-en-wav-current.tar.gz

rm -f asterisk-core-sounds-en-wav-current.tar.gz

tar xfz asterisk-extra-sounds-en-wav-current.tar.gz

rm -f asterisk-extra-sounds-en-wav-current.tar.gz

# Wideband Audio download

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-g722-current.tar.gz

wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz

tar xfz asterisk-extra-sounds-en-g722-current.tar.gz

rm -f asterisk-extra-sounds-en-g722-current.tar.gz

tar xfz asterisk-core-sounds-en-g722-current.tar.gz

rm -f asterisk-core-sounds-en-g722-current.tar.gz

Set Asterisk ownership permissions.

chown asterisk. /var/run/asterisk

chown -R asterisk. /etc/asterisk

chown -R asterisk. /var/{lib,log,spool}/asterisk

chown -R asterisk. /usr/lib64/asterisk

chown -R asterisk. /var/www/

Install and Configure FreePBX

A few small modifications to Apache.

sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php.ini

sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/httpd/conf/httpd.conf

sed -i 's/AllowOverride None/AllowOverride All/' /etc/httpd/conf/httpd.conf

systemctl restart httpd.service

Download and install FreePBX.

cd /usr/src

wget http://mirror.freepbx.org/modules/packages/freepbx/freepbx-13.0-latest.tgz

tar xfz freepbx-13.0-latest.tgz

rm -f freepbx-13.0-latest.tgz

cd freepbx

./start_asterisk start

./install -n

That's it!

You can now start using FreePBX.  Open up your web browser and connect to the IP address or hostname of your new FreePBX server.  You will see the Admin setup page, which is where you set your  'admin' account password, and configure an email address to receive update notifications. 

We hope you enjoy using FreePBX 13!

Automatic Startup

Please note you need to set up FreePBX to start asterisk (and it's associated services) on bootup. [/display/FOP/Example+systemd+startup+script+for+FreePBX You can view an example systemd startup script here].