查看“SBC虚拟机安装”的源代码

Sangoma SBC 虚拟机安装
;;;Download
The Wiki download page contains the latest Sangoma SBC ISO.
http://wiki.sangoma.com/NSC-Download
It is recommended that customers download the latest Sangoma SBC ISO.
Only use the older versions if you are already in production and need to remain on the old version.
Please download the latest Sangoma ISO onto your system.

;;;Sangoma SBC VM License
Sangoma Sales will provide you with a: License Key
You will use this key the generate SBC License File and upload it to the Sangoma SBC GUI. 
If you do not have the Sangoma SBC License Key please contact Sangoma Sales. (sales@sangoma.com)

;;;SBC VM Installation
Download Sangoma SBC ISO
http://wiki.sangoma.com/NSC-Download
Install Sangoma ISO on VM of choice
Follow the ISO installation instructions.
Next Step is to Log into the Sangoma SBC GUI

;;;Default WebGUI Login
http:// <ip  of VM box >
User: root
Pass: < specify the password you used during install>

;;;License File Generation
Once you have logged into the Sangoma SBC GUI.
One of the first steps is to install the correct license.
In order to generate the Sangoma SBC license file, you need the License Key.
Refer  to License Key section above.

;;;Step by Step Instructions
*Navigate to
**Sangoma SBC License Generation Page: http://prod-license.sangoma.com/
 
*Specify above license key
*Specify the MAC address of the Sangoma SBC VM eth0 device.
*To determine your VM eth0macaddress:
**Navigate to Sangoma SBC GUI
**Login
**Click on Help -> About
**The About page contains System Information table.
***This table will contain the MAC address of your eth0 device.
*Once you have filled out the MAC address and the Key
**Click generate a license
 
*Download License to your computer.
 
*Apply Sangoma SBC License
 
*Navigate to Sangoma SBC GUI
**Login
**Click on System -> License
**Click on Upload
**Select downloaded license file
**At this point you will be ready to use the SBC.