查看“WebGUI: Basic Call Routing”的源代码

WebGUI call routing (也称为Basic call routing)，这是一个界面管理工具，方便用户通过SBC界面配置来管理创建呼叫路由。
每个基本的拨号流程可以支持多个路由规则。
Each rule deals with a specific condition which needs to be met.
You can program the rule to continue to the next rule if it passes or fails.
;;;WebGUI Call Routing Section

Navigate to Configuration -> Call Routing
http://manula.s3.amazonaws.com/user/1885/img/sangoma-sbc-webgui-call-routing-1.png


Basic Call Routing – Default
This section deals with default parameters for that particular dialplan.
Rules
This section deals with the specific rules which will be processed within the dialplan.
Each rule is described based on the selections chosen within the rule configuration.


;;;Call Routing Default Parameters
http://manula.s3.amazonaws.com/user/1885/img/sangoma-sbc-webgui-call-routing-general.png
The default parameters identify the description of the dialplan, and what the default SIP response code will be in an event of a failure.
Description
Description of what the dialplan will accomplish.
Trace Call
Whether the dialplan/call routing profile will include a trace within the SBC logging.
Default Response
Default SIP response code which will be sent in the event that the dialplan cannot process the call which is handed to it.

;;;Call Routing Rule Creation

Navigate to Configuration -> Call Routing section and select Add Rule
http://manula.r.sizr.io/large/user/1885/img/sangoma-sbc-webgui-call-routing-rules.png

Condition section
Can set up to 5 condition which the rule will validate against.
The rank is the priority of that rule within the dialplan.
The stop policy determines whether the dialplan should stop processing if the rule matches, or whether it should continue to the next rule.
Actions to perform if condition matches section
Can set up up to 5 actions to perform if the conditions set are matched.
Can be different actions
Example: bridge to another trunk and log the transfer within the SBC logs.
Actions to perfom if condition doesn’t match section
Can set up to 5 actions to perform if the condition does not match.
Can be different actions
Example: hangup the call with a specific SIP response code and log the call within the SBC logs.