查看“基本设置General Settings (2.10 and lower)”的源代码

'''General Settings 基本设置用户使用指南'''

''注意'' 此模块仅使用在2.10 以下版本

'''什么是基本设置用户指南'''

The General Settings Module is a module that was used in FreePBX 2.10 and lower to set a variety of general settings. &nbsp;Starting in FreePBX 2.11, the General Settings Module has been eliminated and the settings that were contained in that Module have been moved to other modules.

'''How Do I Get to the General Settings Module?'''

To access the General Settings Module in FreePBX 2.10, access the graphical user interface using a web browser. &nbsp;Click on the "Settings" pull down menu at the top and then select "General Settings".

http://wiki.freepbx.org/download/attachments/4161655/General%20Settings%20Pulldown.png

'''What Do Each of the General Settings Options Mean?'''

http://wiki.freepbx.org/download/attachments/4161655/General%20Settings%201.png

&nbsp;

You can get a general description of what each option does by placing your mouse on the question mark to the right of the option (in FreePBX 2.10) or on the text of the option (in FreePBX 2.9 and earlier), and a tooltip will appear that explains the option. &nbsp;Make the changes that you desire, then scroll to the bottom, click "Submit Changes," and then click the red "Apply Config" bar at the top of the screen.

There are several options that you may want to consider changing from the default:

'''Asterisk Dial Command Options: &nbsp;'''r

'''Ringtime Default:'''&nbsp; Your preference

'''Direct Dial Voicemail Prefix:'''&nbsp; &nbsp;*86

'''Do Not Play "please leave message after tone" to caller:''' &nbsp;Checked

'''Operator Extension: &nbsp;'''Your preference

'''24-hour format: &nbsp;'''No

'''Allow Anonymous Inbound SIP Calls: &nbsp;'''Yes

'''Update Email: &nbsp;'''Your Preference

Note: &nbsp;If you choose to "Allow Anonymous Inbound SIP Calls," you should also create a catch-all Inbound Route called "DeadRestricted" that routes unmatched calls to "Terminate Call:Hangup." &nbsp;See the instructions for the Inbound Routes Module for more details.

'''Where did the General Settings Options Go in FreePBX 2.11 and later?'''

In FreePBX 2.11, this module has been eliminated, and the settings have been moved to the Advanced Settings Module, the Module Admin Module, or the Voicemail Admin Module as indicated below:

&nbsp;

'''Dialing Options/ALL''' -&gt; Advanced Settings/Dialplan and Operational



'''Call Recording/Extension Recording Override''' -&gt; ELIMINATED

'''Call Recording/Call Recording Format''' -&gt; Advanced Settings/System Setup

&nbsp;

'''Voicemail/Ringtime Default''' -&gt; Advanced Settings/Dialplan and Operational

'''Voicemail/Direct Dial Voicemail Prefix''' -&gt; Feature Codes

'''Voicemail/Direct Dial Voicemail Message Type''' -&gt; Voicemail Admin/Dialplan Behavior

'''Voicemail/Voicemail Recording Gain''' -&gt; Voicemail Admin/Dialplan Behavior

'''Voicemail/Operator Extension''' -&gt; Voicemail Admin/Dialplan Behavior

'''Voicemail/Do not play "…" to caller''' -&gt; Voicemail Admin/Dialplan Behavior

'''Voicemail/Voicemail VMX Locator''' -&gt; Voicemail Admin/Dialplan Behavior

&nbsp;

'''International Settings/Country Indications''' -&gt; Advanced Settings/Dialplan and Operational

''''''International Settings/24-hour format''' -&gt; Advanced Settings/Dialplan and Operational

&nbsp;

'''Security Settings/Allow Anonymous Inbound ...''' -&gt; Asterisk SIP Settings/Advanced General Settings

&nbsp;

'''Online Updates''' - &gt; Module Admin/Frog & Shield Image (upper right)

&nbsp;