查看“呼叫流程控制模块”的源代码

'''呼叫流程控制用户使用指南'''

''注意''此模块支持FreePBX-13 以上版本


'''总览介绍'''

呼叫流程模块支持用户使用切换设置模式来管理呼入的通话，是否发送到呼叫的正常模式还是呼叫的覆盖模式。 用户可以把此模式看作一个切换开关，当启用这个开关以后，呼叫方的环境被发送到正常的呼叫目的地；当关闭此开关后，呼叫方呼入的呼叫则被发送路由到不同的目的地。例如，如果是正常的工作时间，呼入的呼叫则被路由到一个振铃组，如果是下班时间，则可以路由到一个IVR 语音导航流程。g group while your business is open, and send callers to an IVR after you leave for the day. Your business does not keep regular hours, so using the [file:///E:/display/FPG/Time+Conditions+Module Time Condition] module, which lets you set up automatic toggles, would not work since you come and go as you please.

Call Flow Control is a way to "flip the switch" manually at any time. The current mode is retained until you manually change it again.&nbsp;You can dial a feature code to toggle the Call Flow Control. There are a total of 100 Feature code objects: 0-99. Each can control a call flow and be toggled using the Normal/Override feature code plus the index of 28, so if using 0, the feature code would be *280.

'''Logging In'''

* From the top menu click '''Applications'''
* From the drop down click '''Call Flow'''

'''Creating a Call Flow'''

* From the Call Flow Control main page, click the&nbsp;'''Add''' button.

http://wiki.freepbx.org/download/attachments/28181840/cfc-toggle.png

&nbsp;
* Fill in the information as described below.

http://wiki.freepbx.org/download/attachments/28181840/cfc-form.png

'''Call Flow Toggle Feature Code Index'''

Each Call Flow control toggle feature code starts with *28. The index is the last part of the feature code, which can be 0 through 99. For example, if you choose "0" here, you would dial *280 to toggle the feature code. If you choose "99," you would dial *2899.

'''Description'''

Define a name for this toggle so you can easily identify it in the list.

'''Current Mode'''

Select the '''Normal (Green/BLF off)''' or '''Override (Red/BLF on)''' button to set the initial state for your new Call Flow Control. Later, these buttons can be used (in addition to the feature code) to change the mode.

* 
** '''Normal (Green/BLF off)'''&nbsp;- This is the normal destination that calls go to. If you have a BLF button on your phone programmed to this feature code, the light on the phone will either be off or green.
** '''Override (Red/BLF on)'''&nbsp;- Override mode means you are not going to the normal destination. If you have a BLF button on your phone programmed to this feature code, the light on the phone will be lit (red).

'''Recording for Normal Mode'''

The default recording played when toggling into normal mode is to beep and say "feature code deactivated." You can record your own announcement in the System Recordings module and pick that recording within the Call Flow Control module to override the default recording.

'''''''''Recording for Override Mode'''

The default recording played when toggling into override mode is to beep and say "feature code activated." You can record your own announcement in the System Recordings module and pick that recording within the Call Flow Control module to override the default recording.

'''Optional Password'''

You can optionally set a password that the user who is toggling the call flow will have to enter on their phone before they can toggle this call flow.

'''Normal Flow Destination'''

This is the destination to route the call to when in Normal (Green/BLF off) mode of the toggle. This destination can be any other module on your PBX such as an extension, announcement, or queue.

'''Override Flow'''

This is the destination to route the call to when in Override (Red/BLF on) mode of the toggle. This destination can be any other module on your PBX such as an extension, announcement, or queue.

'''Save'''

* Click the&nbsp;'''Submit&nbsp;'''button
* Click the&nbsp;'''Apply Config''' button

'''Viewing, Editing, and Deleting a Call Flow'''

* If not already at the Call Flow Control main page, click the '''List Toggles''' button.

http://wiki.freepbx.org/download/thumbnails/28181840/list-toggles.png
* A list of call flows will be displayed.

http://wiki.freepbx.org/download/attachments/28181840/list-of-call-flows.png
* To view and/or edit a call flow, click the pencil icon http://wiki.freepbx.org/download/attachments/28181840/edit-button.png
* To delete a call flow, click the X icon&nbsp;http://wiki.freepbx.org/download/attachments/28181840/x.png &nbsp;then click&nbsp;'''OK&nbsp;'''to confirm the deletion, and click the&nbsp;'''Apply Config''' button.