查看“FreePBX-13 Centos-7 源代码安装”的源代码

'''Installing FreePBX 13 on CentOS 7'''

'''Initial&nbsp;System Setup'''

用户必须是ROOT 用户权限!

用户必须关闭 selinux.&nbsp; selinux 以免引起其他安装问题

'''Disable selinux'''

In /etc/sysconfig/selinux , change the following lines:

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/sysconfig/selinux

sed -i 's/\(^SELINUX=\).*/\SELINUX=disabled/' /etc/selinux/config

reboot, and verify the selinux status by running 'sestatus'. It should say:

SELinux status: disabled

'''Update Your System'''

yum -y update

yum -y groupinstall core base "Development Tools"

'''''''''安装其他的支持包和依赖包'''
<pre>
yum -y install lynx mariadb-server mariadb php php-mysql php-mbstring tftp-server \

  httpd ncurses-devel sendmail sendmail-cf sox newt-devel libxml2-devel libtiff-devel \

  audiofile-devel gtk2-devel subversion kernel-devel git php-process crontabs cronie \

  cronie-anacron wget vim php-xml uuid-devel sqlite-devel net-tools gnutls-devel php-pear
</pre>

'''Install Legacy Pear requirements'''

pear install Console_Getopt

'''Firewalld Basic Configuration'''

开放80端口，管理员界面可以访问此端口

firewall-cmd --zone=public --add-port=80/tcp --permanent

firewall-cmd --reload

'''Enable and Start MariaDB'''

安装MariaDB，确保正常运行，这样freepbx能够正常工作，自动启动工作。

systemctl enable <nowiki>mariadb.se</nowiki>rvice

systemctl start mariadb

Now that our MariaDB database is running, we want to run a simple security script that will remove some dangerous defaults and lock down access to our database system a little bit

mysql_secure_installation

此提示要求输入当前用户密码。因为用户已经安装了MySQL，此输入为空，按ENTER键。此提示要求用户设置root 密码。请不要设置'''用户密码'''。在脚本运行时，我们将会自动创建。其他引导设置可以输入YES。

'''Enable and Start Apache'''

FreePBX 使用Apache 服务器，所以页面服务器必须是启动状态。
<pre>

systemctl enable <nowiki>httpd.se</nowiki>rvice

systemctl start <nowiki>httpd.se</nowiki>rvice

'''Install Dependencies for Google Voice (if required)'''

'''Install iksemel

'''&nbsp;'''

cd /usr/src

wget <nowiki>https://iksemel.googlecode.com/files/ikse</nowiki><nowiki>mel-1.4.tar.gz</nowiki>

tar xf iksemel-*.<nowiki>tar.gz</nowiki>

rm -f <nowiki>iksemel-1.4.tar.gz</nowiki>

cd iksemel-*

./configure

make

make install

'''Add the Asterisk User'''

adduser asterisk -M -c "Asterisk User"

'''Install and Configure Asterisk'''

'''Download Asterisk source files.'''

cd /usr/src

wget http://d<nowiki>ownloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz</nowiki>

wget <nowiki>http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz</nowiki>

wget <nowiki>http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-13-current.tar</nowiki>.gz

wget -O <nowiki>jansson.tar.gz</nowiki> <nowiki>https://github.com/akheron/jansson/archive/v2.7.tar.gz</nowiki>

wget <nowiki>http://www.pjsip.org/release/2.4/pjproject-2.4.tar.bz2</nowiki>

</pre>
'''Compile and install DAHDI'''

如果用户没有安装Asterisk 语音卡可以忽略安装Dahdi（特别是虚拟机安装，无需此步骤）。

cd /usr/src

tar xvfz <nowiki>dahdi-linux-complete-current.tar.gz</nowiki>

tar xvfz <nowiki>libpri-1.4-current.tar.gz</nowiki>

rm -f <nowiki>dahdi-linux-complete-current.tar.gz</nowiki> <nowiki>libpri-1.4-current.tar.gz</nowiki>

cd dahdi-linux-complete-*

make all

make install 

make config

cd /usr/src/libpri-1.4.*

make

make install

'''Compile and install pjproject'''

cd /usr/src

tar -xjvf <nowiki>pjproject-2.4.tar.bz</nowiki>2

rm -f <nowiki>pjproject-2.4.tar.bz</nowiki>2

cd pjproject-2.4

CFLAGS='-DPJ_HAS_IPV6=1' ./configure --prefix=/usr --enable-shared --disable-sound\

  --disable-resample --disable-video --disable-opencore-amr --libdir=/usr/lib64

make dep

make

make install

'''Compile and Install jansson'''

cd /usr/src

tar vxfz <nowiki>jansson.tar.gz</nowiki>

rm -f <nowiki>jansson.tar.gz</nowiki>

cd jansson-*

autoreconf -i

./configure --libdir=/usr/lib64

make

make install

'''Compile and install Asterisk'''

cd /usr/src

tar xvfz&nbsp;<nowiki>asterisk-13-current.tar.gz</nowiki>

rm -f <nowiki>asterisk-13-current.tar.gz</nowiki>

cd asterisk-*

contrib/scripts/install_prereq install

./configure --libdir=/usr/lib64

contrib/scripts<nowiki>/get_mp3_source.sh</nowiki>

make menuselect

You will be prompted at the point to pick which modules to build. Most of them will already be enabled, but if you want to have MP3 support (eg, for Music on Hold), you need to manually turn on 'format_mp3' on the first page.

http://wiki.freepbx.org/download/attachments/29753688/ubuntu-14.04-enable-mp3.png

After selecting 'Save & Exit' you can then continue

make

make install

make config

ldconfig

chkconfig asterisk off

'''''''''Install Asterisk Soundfiles.'''

The 'make install' above installs a standard low-quality base sound file by default. This is suitable if you are on a small, underpowered system (such as a Rasberry Pi), but on a larger system you should install higher quality soundfiles. Note that this installs the (8khz) 'wav' soundfiles and G722 (High Definition 'Wideband') audio.

cd /var/lib/asterisk/sounds

wget <nowiki>http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz</nowiki>

wget <nowiki>http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz</nowiki>

tar xvf <nowiki>asterisk-core-sounds-en-wav-current.tar.gz</nowiki>

rm -f <nowiki>asterisk-core-sounds-en-wav-current.tar.gz</nowiki>

tar xfz <nowiki>asterisk-extra-sounds-en-wav-current.tar.gz</nowiki>

rm -f <nowiki>asterisk-extra-sounds-en-wav-current.tar.gz</nowiki>

<nowiki># Wideband Audio download</nowiki>

wget <nowiki>http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-g722-current.tar.gz</nowiki>

wget <nowiki>http://downloads.asterisk.org/pub/telephony/sounds/asterisk-extra-sounds-en-g722-current.tar.gz</nowiki>

tar xfz <nowiki>asterisk-extra-sounds-en-g722-current.tar.gz</nowiki>

rm -f <nowiki>asterisk-extra-sounds-en-g722-current.tar.gz</nowiki>

tar xfz <nowiki>asterisk-core-sounds-en-g722-current.tar.gz</nowiki>

rm -f <nowiki>asterisk-core-sounds-en-g722-current.tar.gz</nowiki>

'''Set Asterisk ownership permissions.'''

chown asterisk. /var/run/asterisk

chown -R asterisk. /etc/asterisk

chown -R asterisk. /var/{lib,log,spool}/asterisk

chown -R asterisk. /usr/lib64/asterisk

chown -R asterisk. /var/www/

'''Install and Configure FreePBX'''

'''A few small modifications to Apache.'''

sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc<nowiki>/php.in</nowiki>i

sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/httpd/conf<nowiki>/httpd.co</nowiki>nf

sed -i 's/AllowOverride None/AllowOverride All/' /etc/httpd/conf<nowiki>/httpd.co</nowiki>nf

systemctl restart <nowiki>httpd.se</nowiki>rvice

'''Download and install FreePBX.'''

cd /usr/src

wget <nowiki>http://mirror.freepbx.org/modules/packages/f</nowiki>reepbx<nowiki>/freepbx-13.0-latest.tg</nowiki>z

tar xfz <nowiki>freepbx-13.0-latest.tg</nowiki>z

rm -f <nowiki>freepbx-13.0-latest.tg</nowiki>z

cd freepbx

./start_asterisk start

./install -n

'''That's it!'''

You can now start using FreePBX. &nbsp;Open up your web browser and connect to the IP address or hostname of your new FreePBX server. &nbsp;You will see the Admin setup page, which is where you set your &nbsp;'admin' account password, and configure an email address to receive update notifications.&nbsp;

We hope you enjoy using FreePBX 13!

'''Automatic Startup'''

Please note you need to set up FreePBX to start asterisk (and it's associated services) on bootup. [/display/FOP/Example+systemd+startup+script+for+FreePBX You can view an example systemd startup script here].